Guide How to Reset Canon G1010, G2010, G3010

Every Epson Printer and Printer with other brands such as Canon and HP that are used continuously, in the long run, will definitely encounter the problem called Error Blink on the Power indicator, Ink Indicator, Indicator Paper either alternately or simultaneously. This is due to and caused by the Pad Counter which has reached the maximum limit of printer storage and usage. So it takes an action reset again so that the Pad Counter status becomes 0 again.

One of the characteristics of the printer that it is time to reset the Waste Ink Pad Counter is the printer when it is turned on directly Blink the Ink and Power Indicator Simultaneously or Alternately Blink the Ink and Power Indicator. 

Instructions on how to reset Canon TS707, download the software to reset the Canon PIXMA TS707 printer with error 5B00, 1700 and flashing yellow 7 times (the power light and the paper light flash alternately). Waste ink spills need to be reset before the machine can be used.

Today Dat Viet Computer will guide how to reset Canon PIXMA G1010, G2010, G3010 printers, these are new models of Canon replacing the G1000, G2000, G3000 series. Canon color inkjet printers after a certain printing time depending on the model and machine mode, all encounter the error 5B00 inkjet error, the machine will not print again, you need to set up and reset the machine.

First, you need to download this Canon G1010, G2010, G3010 reset software from the link: Free Download Canon G1010, G2010, G3010 Resetter

Note: Before resetting, make sure the machine has not been used or use any other free software, it is imperative to use genuine software, to avoid being damaged Main. Currently, there are many websites that copy fake software incorrectly, so in the case of Lock main, the main lock is a lot.

How to reset printer Canon G1010, G2010, G3010 error E5B00

• To reset Canon printers, you need to have the service model of the printer
• Service Tool ST V5302 full key reset software is required

To enter Service mode  G1010, G2010, G3010, follow the steps below:

1. Power off the printer but do not unplug it.
2. Hold down the Power button ( POWER )
3. Keep holding the power button and pressing the STOP button 5 times 
4. After pressing the Stop button 5 times, release the POWER key, wait a little while, you will see the light source is still without flashing.

Guide to Reset Canon G1010, G2010, G3010

   

1. Setting the Canon Pixma TS707 Printer to Service Mode
2. Run the Service Tool Application
3. Click EEPROM
4. Set Main in Absorber on Clear Ink Counter Option
5. Click Set on the Clear Ink Counter Option
6. Set JPN on the Set Destination Option
7. Click Set on the Set Destination option
8. Done