Beranda
Canon

Tutorial How to Reset Canon G1000, G2000, G3000

After using the Canon G1000, G2000, G3000 printers for a long time, there will be an error 5B00 flashing 7 lights, Error 1700 flashing 8 waste ink overflow lights you need to reset using Service Tool V4905 software, RESET CANON ST v.4905 full keygens for use permanently, if the printer later reports a counter overflow error, it can still be used normally.

The software can fix the error code: 5B00 5B02 5B04 5B14 1701 1702 1700. First, please download the Canon G1000, G2000, G3000 Service Tool V4905 reset software., RESET CANON ST v.4905

Versi terbaru kompatibel dengan model Canon ST v4905:

iP2700, iP3600, iP4800, iP4810, iP4840, iP4900, iP4910, iP4940, iP4970, iP4980, iP4990,

iP5810, iP5880, IP7200, iP7240, IP8770, iP8780, etc.


MG2120 MG2140 MG2240 MG2270 MG3140 MG3540 MG3570 MG3600 MG3670

MG3680 MG4140 MG5140 MG5240 MG5270

MG5340 MG5400 MG5450 MG5500 MG5570 MG5600

MG5610 MG5670 MG5700 MG5770 MG6140 MG6150

MG6240 MG6300 MG6400 MG6530 MG6600 MG7100

MG6730 MG6800 MG6870 MG7500 MG7570 MG7770 MG8140 MG8240, etc.


iB4000 4010 4020 4030 4040 4050 4060 4070 4080

iB5000 5010 5020 5030 5050 5050 5060 5070 5080


MP230, MP237, MP258, MP270, MP278, MP280, MP287, MP490, MP540, etc.

MB2000 2010 2020 2030 2060 2070 2080 MAXIFI

MB4000 4010 4040 4030 4040 4040 4060 4070 4080 MAXIFI

MB5000 5010 5050 5030 5050 5050 5060 5070 5080 MB5100 MB5130 MB5150 MB5160

5170 5180 5300 5310 5330 MAXIFI

PRO9000 etc.


TS5000 TS5030 TS5050 TS5070 TS5080 TS6000 TS6050 TS6030 TS6070 TS6080 TS7000

TS7030 TS7070 TS7050 TS7080 TS8000 TS8030 TS8050 TS8070 TS8080 TS9000 TS9050

TS9030 TS9070 TS9080


IX6700 6710 6720 6730 6740 6750 6760 6770 6780

IX6800 6810 6820 6830 6840 6850 6860 6870 6880, etc.

MX410 MX477 MX497 MX538 MX927 MX928 MX937


G1000 G1100 G1400 G1700 G1800 G2000 G2100 G2200 G2400 G2700 G2800 G3000

G3100 G3200 G3400 G3700 G3800 G4000 G4100 G4200 G4400 G4700 G4800


Cara Reset Printer Canon G1000, G2000, G3000 error 5B00

To enter Service Mode follow the steps below:

      1. Turn off the power but don't unplug it.
      2. Hold down the STOP button and hold down the power button.
      3. Keep holding the power button and release the STOP button.
      4. Press the STOP button 5 times then release the power button.
      5. You will see 2 lights are no longer blinking, indicating Service Mode is successful.

      Note: wait until the power light (Power) does not move.

      Steps to Reset Canon Canon G1000, G2000, G3000

          1. Set the Canon Pixma TS707 Printer to Service Mode
          2. Prepare 3 sheets of HVS paper in Printer Baking
          3. Run the Canon G1000, G2000, G3000 Resetter Application
          4. Click EEPROM
          5. In the Clear Ink Counter option, select Play and then click Set
          6. In the Set Destination Region Select the JPN option then click Set
          7. On the Ink Absorber Counter, select Main and Counter V Via 0 then Click Set
          8. Done, turn off and turn on the printer again

          Thus Tutorial Guide on how to reset Canon G1000, G2000, G3000 printers that experience Blink Orange and error code 5B00 or 1700 that you can try to practice. Good luck and good luck

          Posting Komentar