How to Reinstall Windows HP ProLiant ML110 G7
For the first time, I got a Job Reinstall PC Server HP ProLiant ML110 G7 belongs to one of the public high schools located not far from where I live. At the time of the Reinstallation process, it was a little difficult where the way access and display of the BIOS are very different when compared to how to access the BIOS and the appearance of the BIOS of the computer and laptop in general.
Belum lagi di awal pada saat memulai mencoba proses Install HP ProLiant ML110 G7 tidak mau booting melalui Flashdisk, meskipun sudah saya coba ubah-ubah setting di Biosnya. Untuk dapat mengakses BIOS HP ProLiant ML110 G7 at the time after completion calibration just press the F9 and F11 keys for Boot Priority Options. For Boot Priority Drive can also be set in the bios as shown in the photo below, to change the order use select boot priority then press enter.
So early I tried to install using bootable Flashdisk, Because hp ProLiant ML110 G7 did not want to boot through the flash, then I switched to using a Windows Bootable DVD. But it turns out that after successfully Booting THE DVD Installer comes to a new problem that there is a notification:
Windows cannot be installed on this disk. This Computer's hardware may not support booting to this disk. Ensure that the disk's controller is enabled in the computer's BIOS menuAfter I searched for information about the issue, many directed me to change the SATA Configuration BIOS to AHCI. But after I tried and repeatedly alternated Master Bootable Windows the problem always reappeared.
After hours of exposure to the above problem, I finally found a solution. Therefore for PC Server HP ProLiant ML110 G7 has not supported UEFI which means that the hard drive format system used is MBR instead of GPT and for the install process cannot use the UEFI GPT method. Once I convert GPT hard drive to MBR and Enable Sata Legacy Support the install process can run normally as usual.
Info additional: PC Server HP ProLiant ML110 G7 has support install using Master Bootable Flashdisk if you experience obstacles PC Server HP ProLiant ML110 G7 does not want to boot through Bootable Flashdisk, try to find the settings in the Bios and move the Flash Disk to the USB port on the right front adjacent to the indicator light with yellow on.
Posting Komentar