Epson Resetter l130 l220 l310 l360 l365 Free Download

This article will be discussed in full and in detail (full image) on how to reset Epson L130, L220, L36, L360, L365 programs manually (without application) and automatically using the latest version of the Epson Adjustment Resetterter software (Adjprog.exe), plus a download link free.

scot-free general, Epson printers are the L365, L360, L310, L220, L130 series or other series, usually, when it is an error or problem, the ink/paper indicator light will flash alternately / simultaneously so that the printer cannot be used or. don't want to print.

some of the causes that cause blinking on the indicator light, can be caused by the ink in the cartridge that has run out, the cartridge is dirty / uness / damaged, paper clock (there is paper/dirt in the roller), the paper print has reached the maximum limit (more than print), full ink pad and several other causes.

In addition, on the Laya computer (laptop / pc) there will also be a dialog box containing a warning message. eg "it's time to reset ink level", "it's almost time to reset ink level", "waste ink full", "service required", "ink pad is at the end of its service" or error messages such as. For example, like the following pictures.
 

Preliminary inspection of Epson printer errors when you find that the Epson printer is unable to make a print marked with a blinking indicator light or there are various error messages as they are at the top, you should check the initial first to the parts that may be the main culprit. Among them:
  • Check the ink in the printer cartridge, if it runs out, please refill.
  • Check the printer cartridges. Make sure there is no dirt stuck to or blocking and see their position, whether they are properly installed or not.
  • Make sure there is no jammed paper (paper jam) inside the printer rollers.
  • Look at the cable that connects the printer to the computer. Make sure it is installed correctly.
However, if the above is done, but the printer is still not working, you will have to do a total reset. the goal is to reset all data stored by the printer counter IC (EEPROM). For example resetting the maximum amount of paper that has been printed to zero (like new), normalizing the ink pad counter, restoring the printer's initial settings, and so on.

to reset, there are two ways that can be done. The first manual reset is no application and the second is automatic reset using the Epson Adjustment Resetter software program. these two methods work well in several types of Epson L-Series printers, including L130, L220, L310, L360, and L365.

How to Reset Epson L130 L220 L310 L360 L365 Manual Reset

One of the easiest, practical and fast steps to reset Epson L130 / L220 / L310 / L360 / L365 is to reset manually without any software. How to do it? Here are the steps. Unplug the power cord for about 3-5 minutes.
  1. Turn it on and wait until the printer position is perfect.
  2. Next, press and hold the resume button for 5 seconds, then release.
  3. Press and hold the resume button again for 3 seconds, after which release it.
  4. shortly after that, the printer will automatically perform the reset process and wait for it to finish.
  5. If it works, the indicator light will no longer flash and is ready for use.
but if the above manual reset doesn't work then try resetting automatically by using Epson Adjustment Software Program for L Series L130 / L220 / L360 / L365.

Epson L130 L220 L310 L365 auto reset

as mentioned above, which will reset automatically, special software is required, namely Resetter Adjustment Program or Adjprog. This application is a helpful tool for solving various problems that are often faced by Epson printers.

Epson resetter has many functions, which apart from being able to reset all the data stored by the printer IC counter, such as resetting the maximum number of printed documents, resetting the waste ink pad counter, and so on can also be used for maintenance purposes. eg head cleaning, adjust EEPROM, and so on.

  • Epson Adjustment Program name
  • File name AdjProg.exe
  • 2.66 MB in size
  • Windows 7, 8, 8.1, 10 (32bit / 64bit)
  • Epson printers
  • Series L130 L220 L310 L360 L365
Important note: Before downloading the Epson Program Resetter customization file, please turn off your computer's antivirus (don't worry, because this file is not a virus).

How to use Epson Resetter L130 / L220 / L310 / L360 / L365

Download the Epson Printer Adjustment Resetterter (Adjprog.exe) Epson L130 / L220 / L310 / L365 above, then extract the.

Next, please run the Resetter application by clicking 2x on the icon/file "Adjprog-L130-L320-L360-L365.exe".

Click the "Select" button. Select the printer type under "Model Name" and the USB port used, but it is recommended to prefer "automatic selection" only. After that click "OK".

Next, click "Specific adjustment mode" then select "waste ink counter pad" then "OK".

In the next menu, check "main pad counter", then click "check". At this point, the printer will provide some important information about the printer, including the number of times it was printed

After that, check again on "main bearing counter" and continue by clicking "Initialize". Wait until the process is complete.

After the reset process is complete, the computer screen will appear "Please turn on and turn off your printer. Now at this stage, please turn it off and then turn your printer.

Usually, when the printer is properly aligned, there will be no more blinking of the indicator light and at this point, you can use it as usual.

Note: The above tutorial uses the Epson L210 printer as training material, but it can also work for the Epson L130, L220, L310, L360, L365 series.

This is a complete tutorial on how to do a manual and automatic reset using the EPSON L130, L220, L310, L360, and L365 resetter control on this occasion, hopefully, it will be useful for those of you who need it. If you have any questions, please leave a comment. thank you for visiting our site, Greetings!