How to Full Flash Samsung Galaxy Tab A 2016 SM-T285

Beberapa hari yang lalu saya mendapatkan Job Service Android Samsung Tab A6 2016 SM-T285 yang mengalami kendala Bootloop stuck di Logo Samsung seperti tampak pada foto di bawah ini:

To solve the problem Samsung Galaxy Tab A 2016 SM-T285 above that experienced Bootloop Stuck in the Samsung Logo the first time I did is try a hard reset, which is a manual reset using the finger gymnastics method. How to Press and hold the Power Button, UP and Home Volume Button simultaneously, when the Samsung logo appears release the Power Button press and keep pressing and holding the Up and Home volume buttons until the Samsung Galaxy Tab A 2016 SM-T285 goes into Recovery mode. Once the Samsung Galaxy Tab A 2016 SM-T285 goes into recovery mode, the next step is to format the hard reset with Wipe Data and Cache. But after I tried to apply the hard reset method via recovery   Samsung Galaxy Tab A 2016 SM-T285 is still in the boot loop stuck in the Samsung logo.

The next time I tried Flash Samsung Galaxy Tab A 2016 SM-T285 using firmware Samsung Galaxy Tab A 2016 SM-T285 combination 1 file with Odin. But again the results of Samsung Galaxy Tab A 2016 SM-T285 remain stuck in the Samsung logo.

Fed with a flash experiment using 1 file does not work, the next step I try full flash Samsung Galaxy Tab A 2016 SM-T285 using 4 fractions firmware with the risk if it fails then   Samsung Galaxy Tab A 2016 SM-T285 will usually die completely. You can see it in the following video:

Alhamdulillah after I tried to do Full Flash on  Samsung Galaxy Tab A 2016 SM-T285 succeeded, and Samsung Galaxy Tab A 2016 SM-T285 can already turn on normally entering setup mode as seen there is a photo below:

For Firmware  Samsung Galaxy Tab A 2016 SM-T285 official you can get it by downloading it using the SamFrim application: How to Download All Samsung Official Firmware For Free

From here it can be concluded that to overcome the problem of the Android   Samsung Galaxy Tab A 2016 SM-T285 boot loop stuck in the Samsung logo the first step is to do a hard reset via recovery if it does not succeed in doing step two flash using one file, if it is still not successful as well, take the full flash decision using 4 files of firmware fractions with consequences if it fails, in general, will die. For FRP bypass use Exynos files

Then is caused and indicates that the condition of emmc is weak, so when done full flash and it turns out to fail then Android   Samsung Galaxy Tab A 2016 SM-T285 will die completely. Such is the Tutorial Guide on how to Overcome Android   Samsung Galaxy Tab 2016 SM-T285 that Bootloop stuck in the Samsung logo or experiencing other obstacles such as frequent notification of unfortunately the android system has stopped.